How To Change The Band On Fitbit Versa

Need or desire to replace your Fitbit Sense or Versa's wristband (Versa, Versa 2, Versa 3, or Versa Low-cal) but tin't figure out how exactly to remove the current ring?

While Fitbit has always been pretty good about making life easier for those who want to customize their smartwatches, changing out your bands is not one of those "easy" things.

Although Fitbit introduced an updated system to change out the bands speedily, many owners nevertheless have difficulties. If that'southward you, read on for best practices and tips to change your Fitbit Versa's band.

Related reading

• Fitbit irritating your skin or causing a rash? Permit's fix it!
• Find your Fitbit'south serial number
• How exercise I get my Fitbit repaired or replaced under warranty?
• Contact Fitbit client support about problems and warranty info
• 5 Best Fitbit Versa Chargers (Versa/two/iii and More)

How to change your Versa's or Sense'due south wristband

Through trial and error, we learned that the best way to alter a Fitbit band is to place the Versa (or whatever Fitbit tracker or smartwatch) confront down on a flat surface.

If yous commonly use reading glasses, we suggest you lot continue those on when changing bands–spectacles definitely assistance see the band pins or buttons!

Your Fitbit Versa or Sense comes with two detachable bands–an upper (acme) and a lower (bottom) ring. Depending on the model, bands connect to the Fitbit pebble with a pin or a button.

• The newer models of Fitbits similar the Sense and Versa 3 characteristic an updated ring arrangement that uses a button.
• Older models of the Versa (similar the Lite or two) feature a pocket-size pivot that allows you to detach and reattach bands.

You simply need to replace the lesser band if y'all're switching between the small and big bands for the aforementioned band style.

How to remove a wristband from your Fitbit Sense or Versa 3

Before slapping on a new band, you'll demand to remove the one-time 1. To do that, flip your Sense or Versa 3 upside down so that the charging pins and eye-rate monitors confront you.

1. Plow your Sense or Versa 3 on its behind and put information technology on a apartment and make clean surface
2. Locate the band release button for the bottom ring
3. Press and slide the button downwards towards the ring to release it
4. Keeping pressing the button and with your other mitt, gently pull the ring away from the Fitbit pebble

If you want to replace the entire band, echo these steps for the band's tiptop section, besides.

How to remove a wristband from your Fitbit Versa two, Lite, or original Versa

First, flip your Versa upside down so that the charging pins and heart-rate monitors face up.

1. Turn your Fitbit over and identify information technology on a flat, make clean surface
2. On the lesser band, locate the pivot for the quick-release lever
3. Printing this pin inward and slide the band gently to the opposite side to release it from the lookout man
4. One time you push the lever in, the band should be complimentary from the Versa's grips. Pull the other side of the pinout from the trunk of the Versa.
5. Repeat on the other side, if irresolute the unabridged band

The take hold of in removing Fitbit wristbands is that you lot want to angle the ring a bit so that the other end of the pin slides out. Information technology may be frustrating at starting time, but information technology can exist done by looking closely at the orientation.

How to replace a band on your Fitbit Versa or Sense

Install your new Sense or Versa ring!

At present that your onetime band is gone, you are left with just the trunk and your new band.

For newer models like the Fitbit Sense and Versa 3

Replacing the band on these models is a lot easier than earlier models, similar the Versa 2!

Earlier starting, clean the band'southward ends and gently clean within the groove where the band attaches to your Fitbit.

To attach a band to your Sense or Versa 3, button the band's ends into the Fitbit pebbles stop grooves until you hear a click and the band snaps into place.

If you're replacing the entire band, remember that the ring with the loops attaches to the top of the sentry. However, if preferred, you lot can switch this placement–both band ends will attach to either side of your Fitbit pebble.

For older Versa Series, follow these instructions

Before starting, clean the ring's ends and gently clean inside the groove where the band attaches to your Fitbit.

1. Locate both the property pin and the quick release lever on each side of your new band
2. To adhere a new band, hold the band at a 45° angle (A)
3. Slide the band's holding pin into the notch on the Fitbit device (B)
4. Press the quick-release lever in and push button & slide the other end of the ring into place (C)
5. When both ends of the pin are inserted, release the quick-release lever
6. Repeat these steps for the other side, and voila. You have your make new Fitbit Versa band installed, making information technology, and so you are now stylin' and profilin'. Or, you know, just going to the gym.

Are you having more trouble replacing your Fitbit Versa's band?

Take a await at Fitbit'due south video on how to switch bands on your older model Fitbit Versa!

Conclusion

As nosotros stated above, the Fitbit Versa is i of the best smartwatches on the marketplace, and y'all really can't go wrong. Only we want to hear from you!

Let united states of america know in the comments whether you decided to become a new band for your Versa and which one you lot chose. Also, if you accept run into bug, don't hesitate to leave u.s.a. a comment, and nosotros will be more than than happy to help alleviate these bug!

Source: https://www.myhealthyapple.com/change-band-fitbit-versa/

Posted by: kelsohishadinin.blogspot.com

Share this post